PHONEBOOK/
CONTACT
0 - 9, *, #
Multi Purpose Keys
Display phonebook list and options.
Volume (For GXP2100/GXP1450 only).
On GXP2100/GXP1450, press
On GXP2120/GXP2110, when the phone is off hook, press UP or DOWN button to adjust the volume.
Standard phone keypad.
Configure key mode and User ID to use the Multi Purpose key as Speed Dial, BLF, Call Park and etc.
MAKING PHONE CALLS
HANDSET, SPEAKER AND HEADSET MODE
The GXP2120/GXP2110/GXP2100/GXP1450 allows users to switch among handset, speaker or headset when making calls. Press the Hook Switch to switch to handset; press the Headset button to switch to
headset; or press the Speaker button 
to switch to speaker.
MULTIPLE SIP ACCOUNTS AND LINES
GXP2120 can support up to 6 independent SIP accounts; GXP2110/GXP2100 can support up to 4 independent SIP accounts; GXP1450 can support up to 2 independent accounts. Each account is capable of independent SIP server, user and NAT settings. Each of the line buttons is "virtually" mapped to an individual SIP account. In off hook state, select an idle line and the dial tone will be heard.
To make a call, select the line you wish to use. The corresponding LINE LED will light up in green. The user can switch lines before dialing any number by pressing the LINE buttons.
For example: If 2 independent accounts are registered on GXP2120/GXP2110/GXP2100/GXP1450, when LINE 1 is pressed, the LINE 1 LED will light up in green. If LINE 2 is pressed, the LINE 2 LED will light up in green and the subsequent call will be made through SIP account 2.
Incoming calls to a specific account will attempt to use its corresponding LINE if it is not in use. When the "virtually" mapped line is in use, the phone will flash the other available LINE in red. A line is ACTIVE when it is in use and the corresponding LED is red.
FIRMWARE VERSION 1.0.4.23 | GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL | Page 21 of 69 |
