Identity
MD5 Password
HTTP Proxy
HTTPS Proxy
Line Key X
FIRMWARE VERSION 1.0.4.23
to
Enter the Identity for the 802.1x mode.
Enter the MD5 Password for the 802.1x mode.
Specifies the HTTP proxy URL for the phone to send packets to. The proxy server will act as an intermediary to route the packets to the destination.
Specifies the HTTPS proxy URL for the phone to send packets to. The proxy server will act as an intermediary to route the packets to the destination.
Assigns a function to the corresponding line key. The key mode options are:
•Line
Regular line key to open up a line and switch line. The Name and UserID can be left blank.
•Share Line
Share line for Shared Line Appearance feature. Select the Account registered as Shared line for the line key. The Name and UserID can be left blank.
•Speed Dial
Select the Account to dial from. And enter the Speed Dial number in UserID field to be dialed.
•Busy Lamp Field (BLF)
Select the Account to monitor the BLF status. Enter the extension number in UserID field to be monitored.
•Presence Watcher
This option has to be supported by a presence server and it is tied to the "Do Not Disturb" status of the phone's extension.
•Eventlist BLF
This option is similar to the BLF option but in this case the PBX collects the information from the phones and sends it out in one single notify message. PBX server has to support this feature.
•Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active account. For example, if the phone is offhook and account 2 is active, it will call the configured Speed Dial number using account 2.
•Dial DTMF
Enter a series of DTMF digits in the UserID field to be dialed during the call. "Enable MPK Sending DTMF" (under Advanced Setting) has to be set to "Yes" first.
GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL | Page 48 of 69 |
