FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 23 of 69
Select and enter Phonebook;
Select the phonebook entry you would like to call using the navigat ion arrow k eys. Press M ENU
button to enter the entry detail;
Select option "Dial" using the navigation arrow keys and then press MENU button again to dial out.
• Speed Dial. Dial the number configured as Speed Dial on Line Key.
Go to phone's Web GUI->Basic Settings, configure the Line Key's Key Mode as Speed Dial. Select
the account to dial from, enter the Name and User ID (the number to be dialed out) f or the Line
Key. Click on "Update" at the bottom of the Web GUI page;
Off hook the phone, or directly press the Speed Dial key to dial out.
• Call Return. Dial the last answered call.
Go to phone's Web GUI->Basic Settings, configure the Line Key's Ke y Mode as Call Return.
Select the account to dial from, no Name or User ID has to be set on for Call Return;
Off hook the phone, or directly press the Call Return key to dial out.
• Via Page/Intercom.
Take handset off hook; or
Press Speaker button; or
Press Headset button with headset plugged in; or
Press an available LINE key to activate speaker;
You shall hear dial tone after off hook;
Press MENU button to switch the call screen from "Dialing" to "Paging ";
Enter the number;
Press SEND key or # to dial out.
Note:
• After entering the number, the phone waits for the No Key Entry Timeout (Default timeout is 4 seconds,
configurable via Web GUI) before dialing out. Press SEND or # k ey to override the No Key Entry
Timeout;
• If digits have been entered after handset is off hook, the SEND key will works as SEND inste ad of
REDIAL;
• By default, # can be used as SEND to dial the number out. Users could disable it by setting "User # as
Dial Key" to "No" from Web GUI->Account page;
• For Paging/Intercom, if the SIP Server/PBX supports the feature and has Paging/Intercom f eature
code set up already, users might not necessarily need toggle to paging mode in the call screen of the
phone. Simply dial the feature code with extension as a normal call.