Louisville Tin and Stove VFM63 Blower Instructions, If any of the original wire supplied, Page

BLOWER INSTRUCTIONS

INSTALLING THE VFB BLOWER

STEP 1. Remove blower assembly from shipping carton.

STEP 2. Insert blower assembly into upper back of heater (See Figure 8).

STEP 3. Secure blower to heater using three #8 screws (provided) through holes pre-punched in heater back. STEP 4. Locate mounting holes for switchbox (See Figure 8).

STEP 5. Secure switchbox to heater using two #8 screws (provided). STEP 6. Plug power cord into 115 volt three-prong grounded receptacle.

CAUTION: Always unplug power cord before servicing or cleaning heater. This appliance is equipped with a three- prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle.

Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

FIGURE 8

Switchbox

Blower Assembly

Blower

Motor

		Fan
		Switch
Black
White
If any of the original wire supplied
with the appliance must be re-	White	ribbed)(or Green	Black
placed, it must be replaced with a
wire of at least a 105/C tempera-
ture rating.

WIRING DIAGRAM / VFB BLOWER

Page 17