VFM303 - NATURAL GAS

VFM304 - L.P. GAS

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instruc- tions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS:

Do not try to light any appliance.

Do not touch any electric switch, do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information above on this label.

2.Depress gas control knob slightly and turn

clockwise to “OFF”.

3.Turn off all electric power to the appliance.

Gas

Control

Knob

NOTE: Knob can not be turned from “PILOT” to “OFF” unless knob is depressed slightly. Do not force.

4.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information above on this label. If you don’t smell gas, go to the next step.

5.Locate pilot in the cut-out below the burner.

6.Locate piezo ignitor button on top of heater.

7.Turn gas control knob counterclockwise to “PILOT”.

8.Depress gas control knob and hold in. Immediately begin alternately pushing and releasing piezo ignitor button, observing pilot, until pilot is lit. Continue to hold the control knob in for about one

(1) minute after the pilot is lit. Release the gas control knob and it will pop back up. Pilot should remain lit. If pilot goes out, repeat steps 2 thru 7.

If knob does not pop up when released, STOP and immediately call your service technician or gas supplier.

If the pilot will not stay lit after several tries, turn the gas control knob to “OFF” and call your service technician or gas supplier.

9.Turn on all electric power to the appliance.

10.Turn gas control knob counterclockwise to desired temperature setting.

TO TURN OFF GAS TO APPLIANCE

1.Depress gas control knob slightly and turn clockwise to “OFF”.

2.Turn off all electric power to the appliance if service is to be performed.

Page 13

Page 13
Image 13
Louisville Tin and Stove VFM64, VFT302, VFT201, VFM63, VFM304, VFM103, VFM104, VFT202 VFM303 Natural GAS, Gas Control Knob

VFT101, VFT201, VFM303, VFT102, VFM104 specifications

Louisville Tin and Stove has established a solid reputation in the hearth and home industry, particularly with its lineup of innovative gas fireplaces. Among its notable offerings are the VFM303, VFT101, VFT102, VFM304, and VFM204 models, each designed to provide homeowners with efficient, stylish, and comforting warmth.

The VFM303 is a remarkable unit that brings modern aesthetics and functionality to any living space. It features a linear design, making it an ideal focal point for contemporary homes. Equipped with a powerful BTU output, this fireplace ensures ample warmth while maintaining energy efficiency. Its intuitive remote control system allows users to conveniently adjust flame height and heat settings, while the beautiful flame presentation creates an inviting ambiance.

The VFT101 and VFT102 models stand out for their versatility and classic design. Both units come with customizable options such as varied front designs and sizes, enabling homeowners to tailor them to their decor. These fireplaces utilize advanced burner technology that delivers realistic flames and consistent heat output. With programmable thermostats and easy-to-use controls, these models epitomize convenience and user-friendliness, catering to both style and functionality.

In the VFM304, efficiency is taken up a notch with the incorporation of advanced heat exchanger technology. This feature maximizes heat distribution throughout the room, promoting warmth even in larger spaces. The VFM304 also includes a sealed combustion system, ensuring safety and air quality within the home by utilizing outside air for combustion.

Lastly, the VFM204 model combines compact design with robust performance. Ideal for smaller settings, this fireplace does not compromise on effectiveness, providing efficient heating with a sleek look. With a variety of decorative options, including media trays and customizable flame colors, the VFM204 easily fits into diverse interior styles.

Overall, Louisville Tin and Stove's line of fireplaces is characterized by their commitment to quality, safety, and consumer satisfaction. With advanced technologies and attention to design, these models cater to a wide range of preferences, making them a reliable choice for anyone seeking to enhance their living space with the warmth and charm of a gas fireplace.