Louisville Tin and Stove VFM203 INSTALLING HEATER WALL MOUNT VFM6, VFM10, VFT10, Wall Mount

INSTALLING HEATER

WALL MOUNT (VFM6, VFM10, VFT10)

STEP 1. Remove wall mounting bracket from back of heater.

STEP 2. Locate wall stud.

STEP 3. Attach wall mounting bracket to wall stud with top at desired height, using (2) screws provided. Make sure top of bracket is level. See Figure 2.

STEP 4. Hang top of heater on wall mounting bracket. STEP 5. Remove bottom front panel.

STEP 6. Secure back of heater to wall, utilizing anchors (if necessary) or wood screws. See Figure 3.

WALL STUD

WALL

MOUNTING

BRACKET

FIGURE 2

HOLES FOR MOUNTING BACK OF

HEATER TO WALL

FIGURE 3

WALL MOUNT

(VFM20, VFT20, VFM30, VFT30)

STEP 1. Remove wall mounting bracket from back of heater.

STEP 2. Locate two studs.

STEP 3. Attach wall mounting bracket to wall studs with top at desired height using (2) wood screws provided. Make sure top of bracket is level. See Figure 4.

STEP 4. Hang top of heater over wall mounting bracket. STEP 5. Remove bottom front panel.

STEP 6. Secure back of heater to wall, utilizing anchors (if necessary) or wood screws. See Figure 3.

Wall Mounting Bracket Wall Stud

FIGURE 4

INSTALLING VF-FSK FLOOR BASE KIT

STEP 1. Remove floor base from carton.

STEP 2. Align screw holes in base to holes in heater bottom.

STEP 3. Make sure that cut-out in top of floor base aligns with cut-out in bottom of heater and the other cut-out in bottom of heater and the other cut-out in base if facing towards back of unit (see illustration below).

STEP 4. Attach floor base to bottom of heater using four #8 screws (provided).

NOTE: Floor bases are for use on VFM10, VFT10, VFM- 20, VFT-20, VFM30 and VFT30 only. The VFM6 Series has no base and is not approved for use with one.

HEATER

Make sure this cut-out faces back of heater.

Page 9