RCA P46738, P52731, P46732 manual Connecting a cable-TVsystem or, Changing Antenna Input with remote

Your TV has two separate antenna inputs on the back (labeled ANTA and ANT B) that allow you to connect two different signal sources if desired. For example, you can connect a cable-TV system to one input and a home antenna to the other input.

By changingthe ANTENNA: A/B display, in the SETUP menu, you can switch back and forth between the

two signal sources.

Listed below are some other common uses of the two antenna inputs:

•connecting a cable-TV system (or

antenn_i) to one input and a VCR to the other.

•Connecting a cable-TVsystem (or

antenna) to one input and a video game to the other.

•connecting a double-think cable system to both inputs.

•connecting a eable-TV converter/decoder box that scrambles

only premium channels. Connection details are on pages 31-32.

•connecting a cable-TV system to one input and an antenna (VHF/UHF) to the other. This allows you to tone in

•local stations that are not included on your cable system. Remember to change the CABLE./A!R function as

described on page 18 i.fusing your set like this.

The Channel Memory is the list of channels your TV will stop on when you press the CHAN up or down buttons. Your TV provides two

separate Channel Memories-one for ANTA input and one for ANT B input. This allows you to add or delete channels into each channel memory as desired.

When you use the AUTOPROGRAM function, the TV automatically checks both inputs and sets up a separate channel memory for each.

Changing Antenna Input (with remote)

1.Press the ANTENNA button on the remote control to switch from the

ANTA input to the ANTB input. The color of the channel numbers

will change from blue to yellow to let you know you are now watching whatever signal is connected to the ANTB jack on the back of the TV.

Blue for

Yellow for

2.Press the ANTENNA button again to switch back to ANTA. The color of

the Channel numbers will change back to blue to let you know you are now watching whatever signal ' source is connected to the ANTA jack.

(without remote)

1.Repeatedly press MENU to'Select SETUPMENU and then press + or - to display setup functions. Repeatedly press Menu to select ANTENNA: A/B function.

1Press the - or + button to change the setting. The screen display will change from A to B to let you know you are now watching whatever signal is connected to the ANTB jack on the back of the TV. The color of the channel numbers will change from blue to yellow.

3.Press the - or + button again to switch back to ANTA. The screen

display will change back to ANTENNA: A to let you know you are now watching whatever signal source is connected to the ANTA jack on the back of the TV.

25