Follow one of these Steps to connect a
Since
A Follow this diagram if your cable company does not require a converter/decoder box no scrambled channels):
_BI.E/ANT_NA
AI¢I"A
BACK
OFTV
ltJm" B
Incoming
Cable
B Follow this diagram if your cable company requires a converter/decoder box that can be controlled by remote control. Most brands of
D_tails for programming your TV's remote to also control the converter/decoder box are on page 33. See diagram D if you want to connect a VCR.
¢_AlCrEI_A
Incoming _l_-
Cable
_A
'
BACK OF TV
Remember to tune your TV to the output channel of the converter box (usually 2, 3, or 4) when selecting channels via the converter box.
COI_/im'I'Lq
C Follow this diagram if your cable company requires a converter/decoder box that cannot be controlled by remote control.
Scrambled Cable-TV Channels
Some
By connecting the decoder to the ANTA input and
CONVERTER output on the TV as shown here, you can switch between the scrambled and unscrambled channels
using the remote control.
To change the incoming signal from ANTA to ANT B, simply press the ANTENNA button on the remote. Each time you press the ANTENNA button, the channel numbers will change color on the screen to show which antenna signal you are watching.
(Converter/Decoder)
BACK
OFTV
Incoming
Cable
I
*Optional accessories are available from most RCA dealers and electronics supply stores.
\1
Coaxial Antenna Cables*
Nonscrambled cable channels will come thru the ANTB input whenever the channel numbers are yellow. The scrambled channel from the decoder box will come thru the ANTA input whenever the channel numbers are blue. Be sure to leave the decoder box set to the scrambled channel, and remember to tune your TV to the output channel of the converter box (usually 2, 3, or 4).
31
