8.AutoProgram the TV's channel memory.
To start the TV autoprogramming itself, press the MENU.PROG button repeatedly to select SETUP MENU and
then press + to display the setup functions. Repeatedly press
MENU.PROG again to select the A UTOPROGRAM function, and then press +. Details are on page 24.
You can also add and erase channels from memory as desired. Press MENUopROG repeatedly to select the SETUP MENU, then press + to display the setup functions.
Press MENU.PROG repeatedly to select (highlight) the CHANMEM function. Select thedesired channel number by pressing the CHAN up or down button or by pressing the two corresponding number buttons.
Then press + to add a channel, or press - to erase a channel. Details are on page 24.
9.Set the clock.
1.Repeatedly press the MENUopROG button to select the SETUP MENU and then press +. Press MENUopROG repeatedly again to select the CLOCK SET display.
2.Press and hold the - button to select the correct hour (including AM or PM). Press and hold the + button to select the correct minute. The correct time will now appear on the screen whenever you change channels or press the TV or DISPLAY button.
Note: If power is interrupted for an extended time, you will need to reset the clock.
