RCA P52730, P52731, P46732, P46738, P46731 Number Buttons, Arrow Buttons, Picture-in-Picture Buttons

MUTE Button

•Press MUTE to quickly reduce sound to minimum level without affecting the picture. This is especially useful during telephone calls or other interruptions.

•When the sound is muted, the word MUTE will be displayed on the screen.

•To restore sound, press MUTE again or press VOL up.

PREV CH (Previous Channel) Button

•Pressing the PREV CH button causes the TV to change hack to the last tuned channel. This is useful should you want to monitor two channels.

•To operate, select the first channel you wish to watch. Then select the other _hannel by pressing two number buttons (for example, press 0 then 6 for channel 6). The TV will now change back and forth between the two channels each time you press the PREV CH button.

Number Buttons (0-9)

*These buttons let you directly access any channel number-even if the channel is not in the channel memory.

•To select a channel, press two number buttons (first one, then the other). For example, press 0 then 6 for channel 6. Press 1 then 3 for channel 13.

•To select a 3-digit cable channel (like 127), press and hold number button 1 until 1-- appears on the screen. Then press the other two numbers.

Note: Your TV will tune up to channel 128. Check with your cable company to determine which channels are available in your area.

INPUT Button

•Lets you quickly view signals from the INPUT jacks. Pressing this button switches the TV from its current ehaunel directly to channel 90, then channel 91, then channel 92.

•Channel 90 lets you see the signals coming from a device that is connected to the S-VIDEOconnector. Channel 91 accesses the

INPUT1 jacks and channel 92 accesses the INPUT 2 jacks.

ANTENNA Button

•Because your TV has two different antenna inputs on the back (labeled ANT A and ANTB) you can connect more than one antenna or signal source. Press the ANTENNA button to switch from one input to the other.

•The color of the channel numbers on the screen indicates which antenna input you are watching, The channel numbers are blue for ANTA and yellow for ANTB. If the channel numbers are blue, you are watching whatever is connected to the ANTENNA A input on the back of your TV. If the channel numbers are yellow, you are watching whatever is connected to the ANTB input on the back of the TV. Details are on page 25.

CLEAR Button

•Pressing CLEAR clears the screen of all on-screen display messages except MUTE and PARENTAL CONTROL.

RESET Button

•Press RESET to return the picture adjustments to the original settings.

MENU*PROG Button and --/+ Buttons

•Press MENU.PROG repeatedly until the menu you want to display is selected, then press + or-. Next press MENU.PROG repeatedly to select the function you want to adjust and then press + or - to adjust

the setting. Details about using each function begin on page 14.

Arrow Buttons

•Pressing the arrow -/+buttons lets you adjust functions in the menu system.

Picture-in-Picture Buttons

•Press PIP to activate the picture-in-picture feature.

•Press PIP again to deactivate the picture-in-picture feature.

•Press FREEZE to freeze the small picture.

•Press MOVEPIP to move the small picture to the next comer.

•Press SWAP to switch the small picture with the large picture.

•Details are on pages 12-13.

SRS (0)* Button

•Press repeatedly to change settings ofSRS (O) function (Sound Retrieval System).

•Details are on pages 16-17.

*SRS, Sound Retrieval System, and the SRS logo (e) are registered trademarks of SRS Labs, Inc.

11