RCA P46738, P52731, P46732 Preferred Method, TG!roARreaeSeptithn, Operation, Simplified Method

Standard VHS VCR (Not S-VHS)

(qlaese connections-allow you to record TV programs and play back tapes.)

Preferred Method		Atn_
2-Way Signal Splitter**	Back of TV	@=@
(such as RCA #AH047)

tG!°roARreaeSeptithn ///

Back of VCR

Coaxial Antenna Cables**

(such as RCA #AHO65G)

**These optional accessories

(one AHIM7-2-way splitter, two

AH065G?-antenna cables, and one AH077G-audio/videocable) are available as a kit under #AVH500.

OUT $111,1c'rOffl"

@L@.

Shown here is the preferred method of connecting a VCR to your TV. This method uses a 2-way signal splitter to run separate signals to the VCR and TV. This way you can view either TV programs or VCR tapes and not be concerned about the position of the VCR's TV/VCR switch.

Note: When connectedthis way, the audio/video connections from the VCR to the TV are required in order for you to watch tapes being played by the VCR and for picture-in-pictureoperation.

Operation:

•If the VCR is connected to INPUT 1 jacks as shown, select channel 91 on the TV to view whatever the VCR is playing.

•If you connect a second audio/video device to INPUT 2, select channel 92 on the TV to view whatever the second device is

playing.

Note: You can program your TV to automatically select the proper VCR input channel (91 or 92) when you press the VCR 1 or VCR2.LD button. Details are on page 26.

Simplified Method

Incoming

Cable

oko,

AUOtO

@--'@

Coaxial Antenna Cable*

(such as RCA #AH037)

Shown here is a simplified method of connecting a VCR to your

'IV. The preferred method (using a 2-way signal splitter) is shown above.

Note: The audio/video connections from the VCR to the TV are optional; however, these additional connections usually produce a better-quality picture during VCR playback. These connections are :required, however, for stereo playback from stereo VCRs and for picture-in-picture operation.

*Optional accessories are available from most RCA dealers and electronics supply stores.

Operation:

•If the VCR is connected to/NPUT 1 jacks as shown, select channel 91 on the TV to view whatever the VCR is playing.

•If you connect a second audio/video device to INPUT 2, select channel 92 on the TV to view whatever the second device is

playing.

Note: You can programyour TVto automaticallyselect the proper VCR inputchannel (91 or 92) when you press the VCR 1 or VCR2oLD

button. Details areon page 26.

35