RCA P46732, P52731, P46738, P52730, P46731 manual Scween

CAU1X)N

TO AVOID DAMAGE: 1, DO NOT CONNECT

SPEAKER OUTPUT

TO A SEPARATE

AMPLIFIER OR

TO SPEAKERS

CONNECTED TO

ANOTHER

PRODt_T.

2.DO NOT CONNECT

LEFT AND RIGHT SPEAKER OUTPUTS

TOGETHER.

L	V_EO
	INPUT

(_ EXTERNAL SPEAKERS Terminals-permit direct connection of auxiliary speakers. Connection details are

on page 41.

QCABLE/ANTENNA Connectors-used when attaching either a home antenna or a cable-TV system to your TV. Connection details are on pages 30-32.

QSPEAKER Switch-when you connect additional speakers to the EXTERNAL SPEAKERS terminals on the "IV, this switch lets you optimize the sound for the speaker location you choose.

•If you place the speakers on each side of the TV, put switch in EXT position. If the left side of the switch is labeled EXT, the internal audio from the TV's speakers will be muted.

•If you place the speakers behind the viewer (at the back

of the room), pu t switch in INT/EXT SURR position. This maintains normal volume level of the TV's

internal speakers and a surround signal to rear •speakers.

•Details about connecting speakers to the TV are on page 43.

IMPORTANT: Always place switch in INT/EXT SURR position if no external speakers are used (or if external speakers are ever disconnected).

@SELECT OUT Jacks-provide fixed-levelaudio and video output from whatever is displayed on the TV screen (see notes below). Provide audio and video signals suitable for recording.

Can be used for several applications such as:

•VCR editing with two or three VCRs (page 36).

•-recording TV programs onto a camcorder (page 39).

•recording cable-TV programs onto a VCR that is not cable-ready (page 36).

•recording audio onto an audio cassette tape recorder

(pag e 41).

Notes

•Remember that whatever you want to record must be displayed on the TV screen during recording.

•Video signals from the S-VIDEOconnectorcan not be recorded from the SELECT OUT VIDEOjack. To record from an S-VHS component connectedto the S-VIDEO

connector, you must also connect the video cable to the VIDEO INPUT1 jack and then selectchannel 91 on the TV

scween.

•On-screen displays suchas menus and status displays can not be recorded from this jack.

•Special features such as picture-in-picture can not be recorded from this jack.

( )INPVT2Jacks-provide for direct connection of video devices (like VCRs) or compatible home computers and "IV games with video/audio outputs.

To see the signals from a device that is connected to the INPUT2 jacks, tune your TV to channel 92.

@@ INPUT 1 Jacks-provide for direct connection of video devices (like VCRs) or compatible home computers and

TV games with video/audio outputs.

To see the signals from a device that is connected to the INPUT I jacks, tune your TV to channel 91.

QS-VIDEOConnector-provides for direct S-VHS video connection from S-VHSVCR or camcorder.

Remember to also connect the S-VHS VCRs or camcorder's audio jack(s) to the TV's INPUT 1 LEFT and/or R/MONO audio jacks. This is necessary because S-Video cables only carry the super video (picture), not

the audio signal. Connection details are on pages 36 and 39.

Signals from S-VHSdevices connected to the TV's

S-VIDEOconnector and INPUT I audio jack(s) canbe

viewed by pressing the TV button followed by 9 then 0 on the remote- control(or by scanning to TV channel 90 if you have added "90" to channel memory as described on page 24)..

Note: If you want to usethe SELECT OUT jacks, rememberto also connect the S-VHS component'sregularVideocable tothe VIDEOINPUT1 jack, andthen tuneto channel 91.

(_)HI FI OUT Jacks-feed volume-controlled stereo audio out from whatever is displayed on the TV screen. Allow connection of audio amplifier and lets you adjust sound