installing the thermostat, cont.
INSTALLING THE WALL PLATE
2.Position the new wall plate on the wall and pull the labeled wires through the opening.
3.If the existing holes do not match those on the Hunter wall plate, or if there are no existing holes, level the wall plate and mark the wall for two holes.
4.Remove the wall plate and drill two 3/16” holes where marked.
5.Tap the plastic anchors into the holes until they are flush with the wall.
6.Reposition the wall plate on the wall, pulling the wires through the opening. Insert the mounting screws through the mounting holes and into the anchors. Verify that the thermostat is visually level and securely tighten both screws.
14
