Hunter Fan 40120 operation manual Set the Set Temperature slider to the desired temperature

Models: 40120

1 28
Download 28 pages 45.44 Kb
Page 21
Image 21
1.Set the Set Temperature slider to the desired temperature.

Operation

1.Set the Set Temperature slider to the desired temperature.

2.The System Switch determines the operating mode of the thermostat. Select Off or Heat.

3.The Fan Switch should normally be located in the Auto position. To run the fan continuously, slide the Fan Switch to the On position.

Note: In Auto , The fan will be turned on along with normal operation of your system. In a normal gas or oil furnace, the fan will be turned on by your furnace after its warm-up delay.

21

Page 21
Image 21
Hunter Fan 40120 operation manual Set the Set Temperature slider to the desired temperature