Error messages on the screen | Fujitsu Siemens Computers X103 SFF

Troubleshooting and tips

Time and/or date is not correct

You can set the time and date in the BIOS Setup or in the operating system.

►Set the time and date.

i	If the time and date are repeatedly wrong when you switch on your device, the on-board
	battery is flat. Change the lithium battery (see "Replacing lithium battery".

Error messages on the screen

Error messages and their explanation are contained:

●in the manual for the mainboard

●in the "BIOS Setup" manual

●in the documentation for the programmes used

Restoring the hard disk contents

Should you need to restore your hard disk, the instructions are provided on the case of the "Recovery CD" (delivered with your system).

Tips

Out of system resources

If you have too many applications running at once, you may experience problems due to a lack of system resources.

►Close unnecessary applications.

Or

►Run the applications in a different order.

Other manuals

Additional manuals are provided as PDF files on the "User Documentation" or "Drivers & Utilities" CD.

24	VFY-SCED103S, edition 1

Image 32

Fujitsu Siemens Computers X103 SFF manual Time and/or date is not correct, Error messages on the screen, Tips

Contents

Edition X103 SFF Are there Page Published by Edition X103 SFF Operating ManualPage Contents Contents Your Edition X103 SFF Notational conventionsPage Safety notes Cleaning the deviceImportant notes Transporting the device CE marking for devices without radio component Energy saving, disposal and recyclingCE marking Steps for initial setup Preparing for useUnpacking and checking the delivery External devices Setting up the device Vertical operating position Connect the monitor, mouse and keyboard Horizontal operating position with rubber feet Connecting a keyboard Connecting the monitorConnecting the mouse Connecting the device to the mains voltage Initial switch-on Software will be installed Connecting external devices Switching on monitor and deviceInstalling the software Connecting cables Disconnecting cables Ports provided by the device Connecting external devices to the parallel or serial port Connecting external devices to the USB portsPort settings Device driversPage Operation Switching the device onSwitching off the device Indicators provided by the device Drive indicator, e.g. DVDFloppy disk indicator Hard disk indicator ON/OFF switch optional KeyboardImportant keys and key combinations Enter key Warm boot Menu keyShift key Alt Gr e.g. German keyboard Settings in Bios Setup Working with floppy disksPage Troubleshooting and tips Installing new softwareMains voltage supply is faulty Internal power supply overloaded Device cannot be switched off with the ON/OFF switch Screen stays blank No mouse pointer displayed on the screen Floppy disk cannot be read or writtenWrong monitor has been set under Window XP Wrong RAM modules have been inserted Error messages on the screen Restoring the hard disk contentsTime and/or date is not correct Tips System expansions Information about boards Closing the casing Opening and closing the casingOpening the casing Installing a board Assembling and dismantling low-profile unitsRemoving the holding plate Removing a board Inserting and removing the drive cage Removing the drive cageRemoving the cross-piece Removing the front panel Attaching the drive cage Installing the drive cageDisconnecting cables Removing the drive cage System expansions IDE drives and serial ATA drives Installing and removing drivesInstalling the cross-piece Removing and installing accessible drives Installing and removing the hard disk System expansions Replacing lithium battery Extensions to the mainboardMaking changes on mainboard Upgrading main memory Following changes Page Technical data DimensionsWeight Electrical dataPage Data IndexCable Index Scsi