Operation

Switching the device on

►If necessary, switch the monitor on (see the operating manual for the monitor).

►Press the ON/OFF switch on the front of the device.

The power-on indicator lights green and the device is started.

Switching off the device

►Shut down the operating system properly. For Windows: select Shut Down from the Start menu.

►If the operating system does not automatically switch the device into an energy-saving mode or switch it off, press the ON/OFF switch.

The device then consumes a minimum amount of energy.

	!	The ON/OFF switch does not disconnect the device from the mains voltage. To completely
	!	disconnect the mains voltage, remove the power plug from the socket.

► If necessary, switch the monitor off (see the operating manual for the monitor).

VFY-SCED103S, edition 1

Page 23

Image 23

Fujitsu Siemens Computers X103 SFF manual Operation, Switching the device on, Switching off the device

Contents

Edition X103 SFF Are there Page Published by Operating Manual Edition X103 SFFPage Contents Contents Notational conventions Your Edition X103 SFFPage Transporting the device Safety notesCleaning the device Important notes CE marking for devices without radio component Energy saving, disposal and recyclingCE marking External devices Steps for initial setupPreparing for use Unpacking and checking the delivery Setting up the device Vertical operating position Horizontal operating position with rubber feet Connect the monitor, mouse and keyboard Connecting a keyboard Connecting the monitorConnecting the mouse Initial switch-on Software will be installed Connecting the device to the mains voltage Connecting cables Connecting external devicesSwitching on monitor and device Installing the software Ports provided by the device Disconnecting cables Device drivers Connecting external devices to the parallel or serial portConnecting external devices to the USB ports Port settingsPage Operation Switching the device onSwitching off the device Hard disk indicator Indicators provided by the deviceDrive indicator, e.g. DVD Floppy disk indicator Enter key ON/OFF switch optionalKeyboard Important keys and key combinations Alt Gr e.g. German keyboard Warm bootMenu key Shift key Working with floppy disks Settings in Bios SetupPage Internal power supply overloaded Troubleshooting and tipsInstalling new software Mains voltage supply is faulty Screen stays blank Device cannot be switched off with the ON/OFF switch Wrong RAM modules have been inserted No mouse pointer displayed on the screenFloppy disk cannot be read or written Wrong monitor has been set under Window XP Tips Error messages on the screenRestoring the hard disk contents Time and/or date is not correct Information about boards System expansions Closing the casing Opening and closing the casingOpening the casing Removing a board Installing a boardAssembling and dismantling low-profile units Removing the holding plate Removing the front panel Inserting and removing the drive cageRemoving the drive cage Removing the cross-piece Attaching the drive cage Installing the drive cageDisconnecting cables Removing the drive cage System expansions IDE drives and serial ATA drives Installing and removing drivesInstalling the cross-piece Installing and removing the hard disk Removing and installing accessible drives System expansions Upgrading main memory Replacing lithium batteryExtensions to the mainboard Making changes on mainboard Following changes Page Electrical data Technical dataDimensions WeightPage Data IndexCable Index Scsi

Fujitsu Siemens Computers X103 SFF Operation, Switching the device on, Switching off the device

Models: X103 SFF

Operation

Switching the device on

Switching off the device