System expansions
2
1
1
2
►Loosen the screws (1) and (2) of the hard disk.
►Remove the hard disk carrier.
iIt may be necessary to modify the entry for the drive in the BIOS Setup.
►Remove the new hard disk from the package.
►Fasten the hard disk carrier to the new hard disk.
►Fasten the screws (1) and (2).
►Plug in the cables on the hard disk.
3
2
3
1
►Place the hard drive mount into the casing so that it fastens onto the lug (1).
►Slide the hard disk carrier in the direction of the arrow as far as it will go (2). Make sure that the screws on the underneath of the hard disk go into the holes in the base of the casing.
►Fasten the two screws (3).
►Install the drive cage (see "Installing the drive cage").
►Close the casing (see "Closing the casing").
33 |
