Important notes
In this chapter you will find information regarding safety which it is essential to take note of when working with your device.
Safety notes
Pay attention to the information provided in the "Safety" manual and in the following safety ! notes.
During installation and before operating the device, please observe the instructions on environmental conditions in the "Technical data" chapter as well as the instructions in the "Preparing for use" chapter.
You may only operate the device, if the rated voltage for the device is set to the local mains voltage. Check the rated voltage set for this device (see the "Preparing for use" chapter).
The ON/OFF switch does not disconnect the device from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the grounded mains outlet.
Replace the lithium battery on the mainboard in accordance with the instructions in the "Replacing lithium battery" chapter.
Caution, components in the system can get very hot.
Transporting the device
Transport all parts separately in their original packaging or in a packaging which protects ! them from knocks and jolts, to the new site. Do not unpack them until all transportation
manoeuvres are completed.
Cleaning the device
Turn off all power and equipment switches and remove the power plug from the mains ! supply.
Do not clean any interior parts yourself, leave this job to a service technician. Do not use any cleaning agents that contain abrasives or may corrode plastic. Ensure that no liquid enters the system.
Wipe the casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and the mouse.
3 |
