Drive indicator, e.g. DVD | Fujitsu Siemens Computers X103 SFF

Operation

Indicators provided by the device

The indicators are on the front of the casing. Which indicators are available on your device depends on the configuration level you have selected.

1 2

4 3

1 - Drive indicator, e.g. DVD

1 = Drive indicator, e.g. DVD

2 = Floppy disk indicator

3 = Hard disk indicator

4 = Power-on indicator

The indicator lights up when the optical drive of the device is being accessed. You may only remove the CD/DVD when the indicator is dark.

2 - Floppy disk indicator

The indicator lights up when the floppy disk drive of the device is accessed. You may only remove the floppy disk when the indicator is unlit.

3 - Hard disk indicator

The indicator lights up when the hard disk of the device is accessed.

4 - Power-on indicator

–The indicator is green: The device is on.

i	The display can also light up green if the device has been switched off by
	holding the ON/OFF switch (see "Troubleshooting and tips").

–The indicator lights orange:

The device is ready-to-operate or in energy-saving mode. After being switched on with the power button, the device switches on or returns to the state it was in before the energy-saving mode.

	!	In the energy-saving mode the device may not be disconnected from the mains
	!	supply, as this may otherwise result in data loss.
		supply, as this may otherwise result in data loss.

– The indicator does not light up:

The device is disconnected from the power supply or is ready for operation. If your device is ready-to-operate it can be enabled with the ON/OFF switch.

16	VFY-SCED103S, edition 1

Image 24

Fujitsu Siemens Computers X103 SFF Indicators provided by the device, Drive indicator, e.g. DVD, Floppy disk indicator

Contents

Edition X103 SFF Are there Page Published by Edition X103 SFF Operating ManualPage Contents Contents Your Edition X103 SFF Notational conventionsPage Safety notes Cleaning the deviceImportant notes Transporting the device Energy saving, disposal and recycling CE markingCE marking for devices without radio component Steps for initial setup Preparing for useUnpacking and checking the delivery External devices Setting up the device Vertical operating position Connect the monitor, mouse and keyboard Horizontal operating position with rubber feet Connecting the monitor Connecting the mouseConnecting a keyboard Connecting the device to the mains voltage Initial switch-on Software will be installed Connecting external devices Switching on monitor and deviceInstalling the software Connecting cables Disconnecting cables Ports provided by the device Connecting external devices to the parallel or serial port Connecting external devices to the USB portsPort settings Device driversPage Switching the device on Switching off the deviceOperation Indicators provided by the device Drive indicator, e.g. DVDFloppy disk indicator Hard disk indicator ON/OFF switch optional KeyboardImportant keys and key combinations Enter key Warm boot Menu keyShift key Alt Gr e.g. German keyboard Settings in Bios Setup Working with floppy disksPage Troubleshooting and tips Installing new softwareMains voltage supply is faulty Internal power supply overloaded Device cannot be switched off with the ON/OFF switch Screen stays blank No mouse pointer displayed on the screen Floppy disk cannot be read or writtenWrong monitor has been set under Window XP Wrong RAM modules have been inserted Error messages on the screen Restoring the hard disk contentsTime and/or date is not correct Tips System expansions Information about boards Opening and closing the casing Opening the casingClosing the casing Installing a board Assembling and dismantling low-profile unitsRemoving the holding plate Removing a board Inserting and removing the drive cage Removing the drive cageRemoving the cross-piece Removing the front panel Installing the drive cage Disconnecting cables Removing the drive cageAttaching the drive cage System expansions Installing and removing drives Installing the cross-pieceIDE drives and serial ATA drives Removing and installing accessible drives Installing and removing the hard disk System expansions Replacing lithium battery Extensions to the mainboardMaking changes on mainboard Upgrading main memory Following changes Page Technical data DimensionsWeight Electrical dataPage Index CableData Index Scsi