D-Link DSS-8+ manual LED Indicators, Identifying External Components

IDENTIFYING EXTERNAL COMPONENTS

This section identifies all the major external components of the DSS-8+. Both the front and rear panels are shown followed by a description of each panel feature. The indicator panel is described in detail in the next chapter.

Front Panel

The figure below shows the front panel of the DSS-8+.

♦LED Indicator Panel

Refer to the LED Indicator section for detailed information about each of the DSS-8+’s LED indicators.

LED Indicators

Power Indicator (PWR)

This indicator lights green when the hub is receiving power, otherwise, it is off.

Loop Detect (LOOP)

When this indicator lights amber, it means that there is a loop detected, then the network needs to be re-configuration.

Full-Duplex/Collision (Full-Duplex/Collision)

This LED indicator lights green when a respective port is in full

7