Setting
Filter counter | Filter counter |
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset.
For details about resetting the timer, refer to “Resetting the
Filter Counter” on page 57.
Use the Point 78 buttons to set the timer. Select from (Off/100H/ 200H/ 300H) depending on the use environment.
Fig.3 Filter warning icon
Factory default
This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings.
Quit
Exit the Setting Menu.
Filter warning icon appears on the screen at a set time.
✔Note:
•This icon also appears at turning on..
Fig.4 Filter warning icon
✔Notes:
•At selecting input source, the icon (Fig.4) will appear..
•The Filter warning icons (Fig.3 and Fig.4) will not appear when the Display function is set to “Off” (p.46), during “Freeze”(p.27), or "No show"
(p.27).
Factory default
Select Factory default and this box appears. Select [Yes], and the next box appears.
Select [Yes] to activate it.
55
