Sanyo PLC-XU87, PLC-XU84 owner manual Setting, Keystone, Blue back, Display

Setting

Keystone	Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point 78 buttons to switch between each option.
Store ........ Keep the keystone correction even when the
AC power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.

To correct keystone distortion, press the SELECT button. The “Keystone” appears on the screen. Use the Point ed buttons to correct keystone distortion (p.26).

Blue back

When this function is “On,” a blue image is displayed while the input signal is not detected.

Display

This function decides whether to display On-Screen Displays.

On	Show all the On-Screen displays. Use
	this function when you want to
	project images after the lamp
	becomes bright enough. The factory
	default setting is in this option.
Countdown Off	Show the input image instead of the
	countdown when turning on the
	projector. Use this function when you
	want to project the image as early as
	possible even when the lamp is not
	bright enough.
Off	Hide the On-Screen Displays except;
	●On-Screen Menu
	●“Power off?” (p.22)
	●“No signal” for Power management
	(p.50)
	●“Please wait ...”
	●White arrows for the True function
	in the Screen Menu (p.36)

Use the Point 78 buttons to switch between the options.

46