Sanyo PLC-XU84 How to Operate the On-Screen Menu, Basic Operation, Top Control, Remote Control

How to Operate the On-Screen Menu

Basic Operation

The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

1	Press the MENU button on the top control or the
	remote control to display the On-Screen Menu.
2	Use the Point 78 buttons to select a Menu icon. Use
	the Point ed buttons to select an item in the selected
	menu.
3	Press the SELECT button to show the item data. Use

Top Control

	POWER	WARNING	LAMP REP
ON	MENU	INPUT	AUTO
-			SET
OFF			U
	SELECT
			+
	-		V
	VOLUME		OLU

MENU button

POINT buttons

the Point 78 buttons to adjust the values.

To close the On-Screen Menu, press the MENU button again.

✔Note:

•The selected item is not active until the SELECT button is pressed.

SELECT button

Remote Control

POINT buttons

SELECT button

MENU button
On-Screen Menu	Menu icon
Menu bar	Pointer
	(red frame)

Pointer (red frame)

Press the Point ed buttons to move the pointer.

Item

SELECT

button

Item data

Press the Point 78 buttons to adjust the value.

Quit

Exit this menu.

23