Sanyo PLC-XU87, PLC-XU84 Video Input Video System Selection, Video or S-Video, Component

Video Input

Video System Selection

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the AV System Menu icon.
2	Use the Point ed buttons to move the red arrow
	pointer to the desired system and then press the

SELECT button.

Video or S-Video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV System Menu (Video or S-Video)

AV System Menu icon The selected system is displayed.

Move the pointer to the desired system and press the SELECT button.

Component

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

✔Note:

•The AV System Menu cannot be selected when selecting RGB (Scart).

AV System Menu (Component)

AV System Menu icon The selected system is displayed.

Move the pointer to the desired system and press the SELECT button.

40