By settingtheSleepTimer,you canprogramyourTV toturnitself
- Setting Sleep Timer (with or without remote)
off afteracertainperiodof time (uptofourhours).
Thisisusefulwheneveryouwant towatchTV foranhourorso
beforegoingtosleep.
1.Repeatedly press MENU, PROG to select SETUP MENU, and then press + or- to display setup functions. Press MENUopROG to select
SLEEP TIMER.
4.The sleep timer will begin to count down to zero. The word "SLEEP" will appear on the screen whenever
you change channels or press the remote's TV or DISPLAY button to
let you know the sleep timer is activated.
2.Press the + or- button to select the length of time (up to four hours) you want the TV to stay on.
Each time you press the + or- button; the time will increase 30 minutes (up to 4 hours). Then the time display will start over.
3.When finished, the display will automatically disappear from the screen in a few seconds. To make it
disappear more quickly, press the CLEAR button.
The amount of time remaining before the TV shuts itself off will appear in the sleep timer menu whenever you display the SLEEP TIMER function.
1 hour
and
23 minutes
remaining
5.When the sleep timer counts down to 0:00, the sleep timer display will
appear on the screen for a few seconds. Then the TV will turn
itself off.
If you want the TV to stay on when
thi s display appears, press the + button on the remote to add more
time to the SLEEP TIMER display.
- Clearing Sleep Timer
To cancel the sleep timer, enter the
SLEEP TIMER function and then press the + or - button until the screen shows
0:00.
2O
