Pioneer DVD-V7300D manual Weekly timer function operation/display, Clearing the set time, Press =

Weekly timer function operation/display

3 1

2

3

TIMER ON/OFF			WED
10	30		17	45
1.TOP MENU
2.TITLE
3.BARCODE/COMMAND STACK
		CLEAR			ENTER	RETURN

TIMER ON/OFF			WED
10	30		17	45
1.TOP MENU
2.TITLE
3.BARCODE/COMMAND STACK
		CLEAR			ENTER	RETURN

TIMER ON/OFF			WED
10	30		17	45
1.TOP MENU
2.TITLE
3.BARCODE/COMMAND STACK
		CLEAR			ENTER	RETURN

3.Set the operation to be performed at the moment timer playback starts.

1.TOP MENU: Setup for playing from top of the menu.

2.TITLE: Setup for playing the specified title and chap- ter.

÷Refer to ”Playing the specified title and chapter”.

3.BARCODE/COMMAND STACK: Setup for recalling the display of the barcode command stack groups from memory.

÷Refer to ”Setup for recalling the barcode/command stack groups from memory” (See page 53).

÷Select one of the above with or , and press

ENTER .

NOTE

÷This step cannot be performed if the power ON time has not been set.

÷The data is written in memory at the moment the timer setup screen is exited. The timer setup will not be stored in memory if power is turned off before or without exiting the screen.

÷On a DVD disc that has been setup to start playback automatically, the setup made above will not be applied to the disc.

DVD.I Video CD.I CD .

For your reference	Clearing the set time
Memorized data is not erased even if AC	With the TIMER ON/OFF time input screen (shown left)
power cord is unplugged.
	displayed, press CLEAR and then press ENTER of the remote
	control unit.

52

En

TIMER ON/OFF		WED
10	30	17	45
1.TOP MENU

2.TITLE

3.BARCODE/COMMAND STACK

CLEAR ENTER RETURN

Pointer

00–04–29 SAT	08:15.00
MON
TUE
WED 10 30	17 45 T06:C02
THU
FRI
SAT
SUN
ALL		RETURN

÷Select ENTER on the screen to enter the setting and exit the screen. Select RETURN to cancel the setting and return to the previous screen.

DVD.I Video CD.I CD .

Playing the specified title and chapter

÷Move ‰ (pointer) to “2 TITLE” and press ENTER .

Example) To begin playback with Chapter 2 of Title 6

0	6 = NEXT	=	0	2
A: Press =			=

NEXT

= .

B:Press or to select 06 and press ENTER to start the setting of the next set of

figures. Now press or to select 02 and press ENTER .

NOTE

÷When a title and chapter are selected, playback continues after the selected chapter only when there is one or more chapter after it. Playback completes at the end of the se- lected title.

If repeat playback is set in the ADV SETUP menu, the se- lected chapter is played first then the set repeat playback starts.

÷When setting tracks on a CD or Video CD, please enter the track number in the CHAPTER in the above setting. At this time TITLE and BARCODE/COMMAND STACKs settings will not operate.