Step | Group |
| |
|
|
| |
| GROUP 001 |
| |
| 001 | A | |
| 002 | A | |
|
|
|
|
DVD.
Grouping blackboards
Blackboards can be registered by dividing them into groups according to the disc and title to enable selective use later. This makes it possible to store drawn characters and pictures in positions matching the played images.
Pictures and characters comprising groups are also stored as steps.
When executing the blackboards, arbitrary registered blackboard groups can be selected and displayed. Groups also can be deleted.
Selecting a group is done as follows.
When “DISPLAY AREA IN OUT” is displayed on the screen or when the ‰ (pointer) is displayed to the left of GROUP, the group that you want can be selected by clicking on the NEXT or PREV display with the mouse.
The group can be entered by selecting it and clicking on SAVE
on the screen.
DVD.
To select the group
Select the group
BLACKBOARD GROUP 001: 000
1.Press RECALL twice.
÷The step section blinks.
÷The step section should continue displaying 000.
÷When the step is 000, the entire group will be executed.
÷When a step is selected, only the selected step in the group will be executed.
2.Press PREV .
÷Group part blinks.
3.Input the number of the group to be recalled/ executed using the numeric buttons.
4.Press NEXT twice.
÷This starts execution according to the selected black- board.
DVD.
To execute steps in a group
Select the step
BLACKBOARD GROUP 001: 000
1.Press RECALL twice.
2.Press PREV if you want to switch the group.
÷If you do not want to change the group, go to step 5 below.
3.Input the number of the group to be recalled/ executed using the numeric buttons.
4.Press 
5.Input the number of the step to begin execution using the numeric buttons.
6.Press NEXT .
80
En
| ÷ This starts execution of the selected step in the selected |
NOTE | group. |
÷ The step setup is released after the step has been ex- | |
The system cannot enter this mode during display of the player | ecuted. |
control panel. |
|