Pioneer DVD-V7300D manual How to display total, Connecting the player, Screen shows the following

How to display total

hours played and power on time

DVD.I Video CD.I CD .

This unit is capable of displaying the total play time and power ON time as the working condition and maintenance timing information.

The play time and power ON time can be displayed as de- scribed below.

1.Press and hold DISPLAY on the front panel of the main unit before turning power ON, and

press .

STANDBY

ON

2.The screen shows the following:

OPERATING TIME		Power on time, which is
		105 hours 46 munites in
POWER ON	00105:46
PLAY	00078:13	this example.

Total play time, which is 78 hours 13 munites in this example.

3.When an operation (playback from the re- mote, for example) is performed, the time information display disappears and normal operation starts.

NOTE

÷As the time is measured by the CPU clock, the information includes an error of up to 2%.

÷This is not capable of turning the total play time and power ON time as the working condition and maintenance timing information to 0.

Connecting the player

Precautions when connecting the player

This player’s Analog copy protect technology is copy guarded. If you connect the player to a TV via a VCR, or record and playback the contents of a disc with a VCR, the playback picture may not be normal.

Video output Audio output Right

Left

÷Connect plugs to the terminals that match the plug’s color (white, red, yellow).

Interface connector (RS-232C)

✩ screw

÷Align the plug with the connector in the proper orientation and insert, then tighten the lock screws.

S-video output

✩

÷Connect the TV with S-VIDEO terminal to the S-VIDEO output terminal of this player.

External Sync input (BNC)/Video output (BNC)/	Advanced
Component video output (BNC)
÷ Align the plug properly with the tab on the connector, and	Operations
✩
press in carefully, then rotate to the right to lock.
✩ Cables can be found at your local audio/video dealer.
	Connection/etc.

83

En