Barcode/Command stack setting
BC/COMMAND STACK GROUP 001: 001
TITLE |
| 03 |
SEARCH FRAME | 123000 | |
MARK | FRAME | 129000 |
SAVE | DEL INS | EXIT |
Display when the example on the right is input
Note
The difference between search frames and mark frames cannot be set to 24 frames or less. The entry must be 25 frames or greater.
Example 3) To “Play Title 3 Frames 123000 to 129000”
TITLE/CHP
1.Press FRM/TIME .
÷The TITLE number will blink.
3NEXT
2.Press = .
÷Title 3 is set, and the mode switches to Frame Input.
3. Press 1 = 2 = 3 = 0 = 0
=0 = NEXT .
÷This sets the start frame number.
÷If the operation up to the present has been performed during playback, the input start frame is searched now.
4. Press 1 = 2 = 9 = 0 = 0
=0 = NEXT .
÷This sets the end frame number.
÷If the operation in steps 3 and 4 is performed during playback, you can press ENTER in place of specifying
the frame number in steps 3 and 4 above. In this case, the frame number being played is input auto- matically.
BC/COMMAND STACK GROUP 001: 001
TITLE |
| 05 |
SEARCH CHAPTER | 03 | |
MARK | CHAPTER | 08 |
SUBTITLE | 03 | |
AUDIO |
| 2 |
ANGLE |
| 1 |
SAVE | DEL INS | EXIT |
Display when the example on the right is input
For your reference
To play chapter 7 till the end as shown in Example 4), enter Ò8Ó, obtained by adding 1 to 7, in MARK CHAPTER.
62
Example 4) To “Play Title 5 Chapters 3 to 7 with Subtitle 3, Audio 2 and Angle 1”
TITLE/CHP
1.Press FRM/TIME .
÷The TITLE number will blink.
5NEXT
2.Press = .
÷This sets title 5 and the chapter input mode starts.
TITLE/CHP
3.Press FRM/TIME to select SEARCH CHAPTER.
÷This item sets the chapter number where playback should start.
÷Each press switches “CHAPTER” and “FRAME” al- ternately.
3NEXT
4.Press = .
÷This sets the start chapter number.
8NEXT
5.Press = .
÷This sets the end chapter number.
3NEXT
6.Press = .
÷This sets Subtitle 3.
7. Press 2 . (Do not press NEXT .)
÷This sets Audio 2.
8. Press 1 . (Do not press NEXT .)
÷This sets Angle 1. Now go to the next step.
En