Pioneer DVD-V7300D manual Player control using a mouse, Button Selection, Player control icon

Player control using a mouse

Mouse operation is possible by connecting a PS/2 mouse and turning power ON.

DVD.I Video CD.

Button Selection

You can use the mouse to select DVD Menu buttons and but- tons displayed on the screen.

When the mark cursor is placed on a button, it changes to

the mark. While the cursor is displayed as the mark, clicking on a button with the left button on the mouse lets you perform operations in the same way as with the remote con- trol.

*Menu selection with the mouse is not possible with Video CDs.

DVD.I Video CD.I CD..

Player control icon

Pressing the mouse’s left and right button simultaneously or clicking the right button while holding the left button displays the player control icons on the bottom left of the screen. When the mouse pointer is placed on a player control icon, the pointer

changes from to . While the pointer is in the form of , clicking with the left mouse button performs the same operation as the remote control unit button.

Discs	DVD	Video CD	CD
Function
¢	YES	YES	YES
¡	YES	YES	YES
E	YES	YES	NO
3	YES	YES	YES
e	YES	NO	NO
1	YES	YES	YES
4	YES	YES	YES
	YES	YES	NO
TOP MENU	YES	NO	NO
MENU	YES	NO	NO

÷The buttons appearing in video images recorded on com- mercially available DVD video discs may not be located in the recognized positions. With such discs, please use the remote control unit instead of the mouse.

In the case of a DVD

TOP MENU MENU

During	REV	FWD	RETURN
playback

SKIP SCAN STEP PLAY STEP SCAN SKIP

TOP MENU MENU

When the player control icon already mentioned is left- A clicked with the mouse, an action is performed similar to that when each button of the remote control unit is pressed.

÷When SETUP LOCK (MOUSE) on the ADV. SETUP menu is set to OFF, the SETUP and ADV. SETUP buttons appear on the player control panel. You can click these buttons with the mouse to enter the corresponding SETUP menu.

÷When SETUP LOCK (MOUSE) is set to OFF and point “A” is dragged with the left mouse button held down, the location of the player control panel can be changed. Once the location is changed, the new loca- tion will be maintained until the power is turned off. The default panel position is restored when the power is turned off, then back on again. Initialization is also performed when the OSD position is changed and when the video blackboard is displayed.

NOTE

÷The position of the player controls cannot be changed during play- back of PAL discs.

÷The position of the player control panel cannot be changed when the [OSD Position] in the SETUP MENU is set to [Wide] or when the video blackboard is displayed.

In the case of a Video CD		Advanced
In case of left click, this unit works as the icon indicatedVideo
titles cannot be directly selected with a mouse. Right- clicking
the player control icon, as in the figure, displays a number at
the upper right of the screen, and pressing the	the title	Operations
of the number that has been input to be selected.

Track number

4

In the case of the rignt click

The numbers consecutively	The numbers consecutively
decrease by one.	increase by one.

ENTER
Note
If the title of the number that has been input is not present	49
or mouse operation is prohibited, it cannot be executed.
	En