DVD.

96 kHz PCM Output

When the connected amplifier supports 96 kHz, set to (96 kHz). This setting cannot be changed during playback.

SETUP

Press .

The initial setup menu is displayed.

Select [Audio 1].

Select [96kHz PCM Out].

Press the cursor button (right direction).

Select the preferred item.

Press ENTER .

Audio1 2 Video Language General

Dolby Digital Out - Dolby Digital

DTS Out - Off

96kHz PCM Out - 96kHz 3 48kHz

MPEG Out - 96kHz

Digital Out - Off

Move

SETUP

Exit

96 kHz 3 48 kHz: Down-samples a 96 kHz signal to 48 kHz and outputs. Select when connected to an amplifier that does not support 96 kHz.

(Setting when shipped)

96 kHz:Select when connected to an amplifier or DAC that supports 96 kHz.

SETUP

Press .

DVD.

MPEG Output

When the connected amplifier supports MPEG, set to (MPEG).

SETUP

Press .

The initial setup menu is displayed.

Select [Audio 1].

Select [MPEG Out].

Press the cursor button (right direction).

Select the preferred item.

Press ENTER .

Audio1 2 Video Language General

Dolby Digital Out - Dolby Digital

DTS Out - Off

96kHz PCM Out - 96kHz 3 48kHz

MPEG Out -

MPEG

Digital Out -

MPEG 3 PCM

 

 

Move

SETUP

Exit

MPEG:

Select when connected to an amplifier

 

or decoder that supports MPEG.

MPEG 3 PCM: Converts an MPEG signal to a linear PCM signal and outputs. Select when connected to an amplifier that does not supports MPEG. (Setting when shipped)

SETUP

Press .

Settings

41

En