![](/images/backgrounds/185786/185786-9674x1.png)
Switching the command group
BC/COMMAND STACK GROUP 001: 001
Recall screen
Switching the command step
BC/COMMAND STACK GROUP 001: 001
Recall screen
74
DVD.
Recalling/executing barcode
commands in memory
To excute a barcode command group:
Load the disc to excute them.
1.Press RECALL.
2.Press PREV .
3.Input the number of the command group to be recalled/executed using the numeric buttons.
4.Press NEXT twice.
÷This recalls and executes the selected group.
To execute steps in a command group:
Load the disc to excute them.
1.Press RECALL.
2.Press PREV .
3.Input the number of the command group to be recalled/executed using the numeric buttons.
4.Press NEXT .
÷To
5.Input the number of the step to begin execution using the numeric buttons.
6.Press NEXT .
÷This recalls and executes the selected and subsequent steps in the selected group.
NOTES:
÷Pressing REPEAT repeats the execution of the set GROUP.
÷If you press STEP in place of NEXT in step 6 above, command steps will be executed step by step. After one step has been executed, press NEXT to advance to the next step. Pressing
PREV
allows you to return to the previous step.
NOTE
The system cannot enter this mode during display of the player control panel.
En