Pioneer DVD-V7300D manual Correcting a previously, Input Barcode/ Command Stack

Barcode/Command stack setting

DVD.

Correcting a previously

input Barcode/ Command Stack

Example) To change the Audio setting of step 003 from 2 to 1

1.Press MEMORY.

÷“BARCODE/COMMAND” is displayed.

NOTE:

To save the corrected information, press NEXT repeatedly until the last item flashes (ANGLE in this example).

Press NEXT one more time to move to the page for the next step.

In this “next step”, move ‰ (pointer) to SAVE and press ENTER

to save data.

The corrected information is not saved if ‰ (pointer) is moved to SAVE and ENTER is pressed before the end of correction (in the middle of the step being corrected).

2.Press ENTER .

÷The Barcode/Command Stack screen is displayed.

3.Select “NO” with or and press ENTER .

÷The Barcode/Command Stack Input screen is displayed when ENTER is pressed.

4.Press DISPLAY

÷The list display appears.

5.Select “003 ‰” by pressing or .

TITLE/CHP

6.Press FRM/TIME .

÷This initiates the Barcode/Command Stack input mode.

BC/COMMAND STACK GROUP 001: 003

TITLE		05
SEARCH CHAPTER		03
MARK	CHAPTER	05
SUBTITLE		03
AUDIO		2
ANGLE		1
SAVE	DEL INS	EXIT

7.Press NEXT 4 times to select item “AUDIO”.

8.Press 1 .

BC/COMMAND STACK GROUP 001: 003

TITLE		05
SEARCH CHAPTER		03
MARK	CHAPTER	05
SUBTITLE		03
AUDIO		1
ANGLE		1
SAVE	DEL INS	EXIT

9.Press NEXT .

÷The next step’s Barcode/Command Input screen is dis- played.

10.Move the ‰ (pointer) to “SAVE” by pressing

66 and press ENTER .

DVD.

Adding a step in a previously input Barcode/Command Stack

1.Perform steps 1 to 4 of “Correcting a previ- ously input Barcode/Command Stack”.

2.Select the step where a new step is to be

inserted by pressing or .

3.Move the ‰ (pointer) to “INS” by pressing

or and press ENTER .

÷This inserts a new step before the selected step and the numbers of subsequent steps are incremented by 1.

BC/COMMAND STACK GROUP 001/ 001

001PLAY

00303:123000–129000

004 05:03–0703 2 1

005

006

007

008

SAVE DEL INS EXIT

TITLE/CHP

4.Press FRM/TIME .

÷This initiates the Barcode/Command Stack input mode.

5.Set a step in the same way as “Setting a Barcode/Command Stack settings”.

(See page 61- 64)

6.Move the ‰(pointer) to “SAVE” by pressing

and press ENTER .

En