Pioneer DVD-V7300D manual When the word Title is blinking, enter 00 in the Title

	BC/COMMAND STACK GROUP 001: 001
Item display	TITLE		00
	SEARCH	FRAME	000000
	MARK	FRAME	- - - - - -
	SUBTITLE		01
	AUDIO		2
	ANGLE		3

SAVE DEL INS EXIT

Press DISPLAY switches over to the following display

	BC/COMMAND STACK GROUP 001/ 001
	001	SUBTITLE 01 AUDIO 2 ANGLE 3
	002	03:10000–15000
List display	003
	004
	005
	006

007

008

SAVE DEL INS EXIT

Example 5) To input the command for setting Subtitle 1, Audio 2 and Angle 3

1.When the word TITLE is blinking, enter “00” in the TITLE.

÷(Do not press NEXT .).

2.Press SUBTITLE while the TITLE digits are blinking.

3.When the SUBTITLE digits start to blink, press 1 then NEXT .

4.When the AUDIO digit starts to blink, press 2 .

5.When the ANGLE digital starts to blink, press 3 .

1.

2.

BC/COMMAND STACK GROUP 001: 001

TITLE		03
SEARCH	FRAME	123000
MARK	FRAME	129000
SAVE	DEL INS	EXIT

BC/COMMAND STACK GROUP 001: 002

TITLE		00
SEARCH	FRAME	000000
MARK	FRAME	- - - - - -
SUBTITLE		*
AUDIO		*
ANGLE		*
SAVE DEL	INS	EXIT

BC/COMMAND STACK GROUP 001: 002

REPEAT

÷With a play command that specifies the start and end frames, it is not possible to set the subtitle, audio and angle simulta- neously. However, by placing the subtitle, audio and angle setting command as described above before the frame sec- tion play command, the section playback can be executed with the specified setting.

The input as shown above allows to play title 3 frames 10000 to 15000 by setting Subtitle 1, Audio 2 and Angle 3.

With commands other than the frame section play command, such as the frame search, chapter search and chapter sec- tion play commands, the specified setting is valid within each command.

Example 6) To repeat “Play Title 3 frames 123000 to

129000” in Example 3	Advanced
1. Perform steps 1 to 4 in Example 3.
÷The barcode/command stack input screen of the next
step appears.
2. Press RPT A-Bwhile the TITLE number is
blinking.	Operations
÷The REPEAT indicator appears on the screen.

63

En