Pioneer DVD-V7300D manual Barcode/Command stack setting, Setting the Subtitle, Audio, Angle

Barcode/Command stack setting

Example 7) Inputting a command to jump to another group.

DVD.

Setting the Subtitle, Audio

BC/COMMAND STACK GROUP 004: 003

GO TO GROUP - 000

1.When the TITLE number is flashing, press RECALL.

2.The display changes to that indicated in the fig- ure on the left. Input the number of the group you

want to jump to, and press NEXT .

and Angle

SUBTITLE

÷“00” turns the screen color to the color specified in “Back-

ground color” in the GUI menu and makes the played image

invisible.

÷“01” to “32” displays the corresponding subtitle.

÷“33” plays with Subtitle OFF.

÷“34” is used to make the played image made invisible with

To change a previously input “GO TO GROUP” command group number, press RECALL during Detailed or List display, and input the new number.

Using this command enables consecutive jumping to different groups.

< Conceptual representation >

GROUP - 001	GROUP - 002	GROUP - 004
*	*		*
*	*		*
*	*		*
*	*		*
GO TO GROUP - 002	GO TO GROUP - 004		GO TO GROUP - 010

You can also create standby display groups. If you do this, you return to the standby display after jumping to another group.

<Conceptual representation >

GROUP - 001

“00” visible again.

÷“99” retains the previous condition. This is used to change

other setting than SUBTITLE while maintaining the SUBTI-

TLE setting the same.

÷“35” to “98” are invalid.

AUDIO

÷“0” plays image with Audio OFF.

÷“1” to “8” selects and plays the corresponding audio.

÷“9” retains the previous condition.

ANGLE

÷“1” to “8” selects and plays the corresponding angle.

÷“9” retains the previous condition.

÷“0” selects and plays Angle 9.

NOTE

÷When “retain the previous condition” is selected, “✽” is dis- played in the input screen.

÷The barcode/command stack cannot be executed if a value that does not exist in the disc is input.

*

*

*

*

REPEAT

Jump

GROUP - 002

*

*

*

*

GO TO GROUP - 001

example

RECALL 002 + PLAY or

External option switch Group 002

DVD.

To use only the chapter search or frame search

In item “MARK CHAPTER” or “MARK FRAME”, simply press

NEXT

without setting anything.

A still image is displayed after search.

DVD.

To change a value

GROUP - 003

during input

*

example

RECALL 003 + PLAY or

External option switch

Press the numeric button of the correct number (including 0).

PREV

*Group 003

*

*

GO TO GROUP - 001

GROUP - 004

		example
		RECALL 004 + PLAY
		or
		External option switch
	*
		Group 004
	*
	*
64	*
	GO TO GROUP - 001

To return to a previous setting point, press .

DVD.

To cancel input in the middle

Move the ‰ (pointer) to “EXIT” by pressing the cursor button

(right direction) and press ENTER .

En