The universal remote is preprogrammed to control an satellite receiver. If your cable box has its own remote to change channels, you will probably be able to program the TV's remote to control both the TV and the cable box.
The TV's remote is designed to control several brands of cable boxes. To program the remote, press and hold the
SAT.CABLEbutton, then the
code number for your brand of cable box. Refer to the chart below to find
the code number for your cable box. Press the POWER button next to
You may need to try each of the code
numbers listed for your brand until you find the one that works.
After the TV's remote is programmed, you'll be able to turn on the cable box by pressing SAT.CABLE, then POWER. You can change channels on the cable
box by pressing the CHAN buttons whenever the remote is in the "cable"
mode. To put the remote in the "cable" mode, press the SAT.CABLE button. Press the TV button to put the remote backinto the TV mode so the remote buttons will control the TV again.
Programming Remote To Control _(with remote only)
1.Refer to the chart below to find the code number that corresponds to the brand name of your cable box. Keep this number in mind. If more than one number is listed, you may need to try each one separately until you find the one that works.
2.Press and hold the SAT.CABLE button on remote.
3.Press two number buttons (first one, then the other) to enter the code number for your brand of cable box. Note: You must press the two
number buttons while pressing the DSSoCABLEbutton.
Cable Box
4.Point the remote at the cable box and press the POWER button to test the code number.
•If the right number was entered, the cable box should turn on. Pressing the CHAN buttons should then
also change channels on the cable box.
•If the cable box does not react to the remote (or if the remote turns on the cable box but does not
change channels), repeat steps 1 thru 4 with another code number.
Operating Notes:
•After the remote is programmed, it
will turn on the cable box whenever you press SAToCABLE and then POWER. To turn off the cable box, press SAToCABLE, then POWER.
•To change channels on the cable box, press SAToCABLE then CHAN up or down.
•You may have to reprogram the remote control if you change its batteries. Try not to press any buttons while changing batteries.
•Depending on the age, brand, model, and type of equipment, some models may not be able to respond to the remote.
ABC |
| .............................................................. | :.22,46,53,54 | Randtek. | ...................................................................................... | 07,08 | ||||||
Anvision |
|
| 07,08 | RCA |
| 00,27 | ||||||
Cablestar |
|
| .07,08 | Regal |
| 03,12,13 | ||||||
Diamond |
|
|
| 56 | Regency | ...................................................................................... | 02,33 | |||||
Eagle |
|
|
|
| 07,08 | Samsang | ..... _ |
| 44 | |||
Eastern | International | ....................................................................... |
| 02 | Scientific | Atlanta | 03,22,35,63,64 | |||||
General | Instrument | ...... ............................................ | , | 46 | Signature | .......................................................................................... |
| 46 | ||||
GI 400 | _ | 04,05,15,23,24,25,30,36 | Sprucer | .................................. | 27 | |||||||
Hamlin |
|
|
| 03,12,13,34,48 | Starcom |
|
| 46 | ||||
Hitachi |
|
|
| 37,43,46 | Stargate | 2000 |
| 58 | ||||
Jerrold |
| 04,05,15,23,24,25,30,36,45,46,47,62,65 |
| Sylvania | ...................................................................................... | 11,59 | ||||||
Macom |
|
|
| 37,43 | Teknika |
|
| 06 | ||||
Magnavox |
| 07,08,19,21,26,28,29,32,33,40,41 |
| Texscan |
| 10,11,59 | ||||||
NSC |
|
|
|
|
| 09 | Tocom |
| 17,21,49_0,55 | |||
Oak |
|
|
|
| 01,16,38 | Unika | . ............. 31,32,41 | |||||
Oak Sigma | ; |
| 16 | Universal | ............................................................................ | :..51,52,60 | ||||||
Panasonic | ........................ | _ | 03,27,39,61 | Viewstar | ........................................ | 07,08,19,21,26,28,29,32,33,40,41 |
| |||||
Philips |
|
| 07,08,19,21,26,28,29,32,33_40,41 |
| Warner Amex |
| 44 | |||||
Pioneer |
|
|
| 18,20,44 | Zenith | 14,42,57,61 | ||||||
Note: | Refer to | the | information | sheet packed with | your remote | control | for the latest list of brand names | and code numbers. | Because | this list | ||
is constantly growing, the information sheet packed with your remote control may be a later version of this list and contain additional |
| |||||||||||
brands | and/or | code | numbers. |
|
|
|
|
|
|
| 33 | |
