JVC GVT0057-016A manual Changing the System Settings, Auto Standby, Resume, Av Compulink Mode

7Monitor types

•4:3 LB (Letter Box) : Select this when viewing on TV whose aspect ratio is 4:3.

While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.

•16:9 WIDE: Select this when viewing on TV whose aspect ratio is 16:9.

Changing the System Settings

On SYSTEM menu, you can change the following settings.

AUTO STANDBY		OFF
RESUME		OFF
AV COMPULINK MODE		DVD 2
		EXIT
PRESS	KEY

• 4:3 PS (Pan Scan) : Select this when viewing on TV whose aspect ratio is 4:3.

While viewing a wide screen picture, the black bars do not appear, however, the left and right edge sides of the pictures will not be shown on the screen.

•Even if “4:3 PS ” is selected, the screen size may

become “4:3 LB ” while playing some DVDs. This depends on how the DVD is programed and recorded.

•If a disc (or some portions of the disc) is recorded with the video signals of 4:3 aspect ratio, this setting does not take effect. The pictures are displayed with full 4:3 aspect ratio or with 4:3 Letter Box.

•AUTO STANDBY :

You can turn off (into standby) the unit automatically.

–Select 30“ ” to turn off the unit automatically if no operation is done for 30 minutes.

–Select 60“ ” to turn off the unit automatically if no operation is done for 60 minutes.

–Select OFF“ ” to deactivate this function.

•RESUME :

This unit can memorize the stop-point where DVD, SVCD or VCD playback stops. When the playback is selected again, it starts from where it has been stopped— Resume play.

–Select ON“ ” to activate Resume play.

–Select OFF“ ” to deactivate Resume play. Playback always starts from the beginning.

•AV COMPULINK MODE :

When connecting this unit to a JVC’s TV with the AV COMPULINK remote control system, select the proper setting.

–Select DVD“ 1” when connecting this unit to the COMPONENT VIDEO or INPUT-2 terminals on a TV.

–Select DVD“ 2” when connecting this unit to the INPUT-1 terminals on a TV.

–Select DVD“ 3” when connecting this unit to the INPUT-2 terminals on a TV.

* For AV COMPU LINK control system, see page 48.

– 42 –