Installing SSD/MAIN HDD-H9.5mm / HDD-H12.5 mm

Replacement Procedures

The following describes the procedure for installing the main HDD.

1. Install a SSD/HDD to the SSD/HDD holder and secure it with the following screws.

∙ M3.0×3.0B FLAT BIND screw

NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for four screws securing the HDD holder.

2.Insert the SSD/HDD assembly into the SSD/HDD slot and connect it carefully to the SSD/MAIN HDD on the system board.

3.Secure the SSD/HDD assembly with the following screw.

	M2.5×3.0B	FLAT BIND screw	x2
	M2.5×4.0B	FLAT BIND screw	x2

4-15

Toshiba X500 manual Installing SSD/MAIN HDD-H9.5mm / HDD-H12.5 mm