Replacement Procedures
4.7HDD (SECOND HDD)
Removing second HDD-H9.5mm / HDD-H12.5mm
The following describes the procedure for removing the second HDD (See Figure
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the device.
1.Turn the computer upside down.
2.Remove the following screws securing a HDD slot cover and remove a HDD slot cover.
∙ M2.5×4.0B | FLAT BIND screw | x2 |
3. Remove the following screws securing the HDD assembly.
∙ M2.5×3.0B | FLAT BIND screw | x2 |
4. Disconnect the HDD assembly from the connector on the system board.
Figure 4-7-1 Turn the computer upside down
Qosmio X500 Maintenance Manual |
