Replacement Procedures
4.20 LCD unit / FL inverter
CAUTION: When replacing a LCD, it is required that SVP parameter is set. Update with the latest EC/KBC as described in Appendix H “EC/KBC Rewrite Procedures”.
Removing the LCD unit / FL inverter
The following describes the procedure for removing the LCD unit and FL inverter (See Figure
Remove Screw MYLAR cover X8
1. Remove the following screws securing the display mask
M2.5×6.5 screw X8
2.Insert your finger between the edge of the display mask and the LCD, and remove the display mask while releasing the latches of display mask.
Figure 4-20-1 Remove the display mask
Qosmio X500 Maintenance Manual |
| 57 |
