Replacement Procedures
Installing Second HDD-H9.5mm / HDD-H12.5mm
The following describes the procedure for installing a HDD.
1. Install a HDD to the HDD holder and secure it with the following screws.
M3.0×3.5F | FLAT BIND screw | x4 |
NOTE: Although they are 3mm head screws, screw torque must be set in
2.Insert the HDD assembly into the HDD slot and connect it carefully to the MAIN HDD on the system board.
3.Secure the HDD assembly with the following screw.
| M2.5×3.0B | FLAT BIND screw | x2 |
| M2.5×4.0B | FLAT BIND screw | x2 |
Qosmio X500 Maintenance Manual |
