Toshiba X500 manual Memory module, Removing a memory module

Replacement Procedures

4.8Memory module

CAUTION: The power of the computer must be turned off when you remove a memory module. Remove a memory module with the power on risks damaging the module or the computer itself.

Do not touch memory module terminals. Any dirt on the terminals may cause memory access problems.

Never press hard or bend a memory module.

Removing a memory module

To remove a memory module, confirm that the computer is in boot mode. Then perform the following procedure (See Figure 4-8-1 to 4-8-2).

1. Loose the screw securing the memory slot cover.

 M2.5×4.0B FLAT BIND screw x3

2.Remove the memory slot cover.

3.Open the left and right latches and remove a memory module.

Qosmio X500 Maintenance Manual (960-Q08) 4-25