Test Program for Field.
3.10 Real Time Clock Test
To execute the Real Time Clock Test select 07 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Real Time Clock Test contains three subtests that test the computer’s real time functions. Move the highlight bar to the subtest you want to execute and press Enter.
Subtest 01 | Real Time |
| This subtest allows you to change the date and time. To execute the Real Time |
| Subtest, follow these steps: |
| 1. Select Subtest 01 and the following displays: |
[ REAL TIME TEST ]
Current date :
Current time : hh:mm:ss
Enter new date :
Enter new time : hh:mm:ss
Press [Enter] key to exit test
2.If the current date is not correct, enter the correct date at the "Enter new date" prompt and press Enter. The following prompt displays:
Enter new time :
3.If the current time is not correct, enter the correct time using a
NOTE: If NO is selected for Test Loop on the Test Parameter menu, the Real Time Clock Test menu displays.
If YES is selected for Test Loop on the Test Parameter menu, the screen above displays and the test is executed again. Press Ctrl + break to return to the Real Time Clock Test menu.
Qosmio X500 Maintenance Manual | 45 |
