Replacement Procedures
4.Unlock the CPU by rotating the cam on the CPU socket 120 degrees to the counterclockwise with a
5.Remove the CPU.
Figure 4-19-2 Remove the CPU
Installing the CPU
The following describes the procedure for installing the CPU (see Figure
1.Check that the mark of cam is in the unlocking position.
2.Attach the CPU to the correct position in the CPU socket.
3.Fix the CPU by rotating the cam 120 degrees to the clockwise with a
4.If there is already silicon grease on the CPU, clean it with a cloth.
Using a special applicator, apply silicon grease so that the CPU chip on the CPU is completely covered.
5.Please apply 0.1cc silicon grease (Shinetsu 7762) for each repair. And apply Thermal pad for
NOTE: Apply the silicon grease enough to cover the chip surface using the special applicator. Thermal pad is fixed for each one, no need special applicator.
Qosmio X500 Maintenance Manual |
| 55 |
