Replacement Procedures
4.4SSD/HDD (Main HDD)
Removing a SSD/MAIN HDD-H9.5mm / HDD-H12.5mm
The following describes the procedure for removing the SSD/main HDD (See Figure
CAUTION: Take care not to press on the top or bottom of a SSD/HDD. Pressure may cause data loss or damage to the device.
1.Turn the computer upside down.
2.Remove the following screws securing a SSD/HDD slot cover and remove a SSD/HDD slot cover.
∙ M2.5×4.0B | FLAT BIND screw | x2 |
3. Remove the following screws securing the SSD/HDD assembly.
∙ M2.5×3.0B | FLAT BIND screw | x2 |
4. Disconnect the SSD/HDD assembly from the connector on the system board.
Figure 4-4-1 Turn the computer upside down
Qosmio X500 Maintenance Manual |
