Removing a Wireless LAN card

Replacement Procedures

4.10Wireless LAN card

The following describes the procedure for removing a Wireless LAN card (See Figure 4-10-1 to 4-10-2).

1.Remove the following screw of wireless cover securing wireless LAN card cover and remove it. And remove screw of wireless board

∙ M2.5. x 3.0B

BIND screw

2.Disconnect the wireless LAN antenna cable from the connectors on a wireless LAN card

3.Open the left and right latches holding a wireless LAN card and remove a wireless LAN card from the connector on the system board.

4-31