Optical disk drive, Removing an optical disk drive

Replacement Procedures

4.5Optical disk drive

NOTE: Do not apply excessive force to the top of an optical disk drive.

Do not touch the shaded portion of the figure below, when the drive is removed or installed.

The following describes the procedure for removing an optical disk drive (See Figure 4-5- 1and 4-5-2).

1.Remove MAIN HDD Slot cover and next remove the following screws securing an optical disk drive.

∙ M2.5×3.0B FLAT BIND screw

2.Disconnect an optical disk drive toward the arrow direction from the connector CN26 on the system board.

4-16