Replacement Procedures
4.Arrange the wireless antenna cables along the guide (front) and secure them with guide.
5.Pass the cables to the back of computer through the slot.
6.Arrange the wireless LAN antenna along the guide and contact with the connector.
7.Install the LAN board and cover ASSY of the system, secure it with the screws
| M2.5x6.5 Flat BIND screws | x7 | |
8. Install the KBD Holder and Keyboard with screws |
| ||
| M2.5x3.0 Flat BIND screws | x4 | |
9. Turn the computer downside and Secure the bottom with screws |
| ||
| M2.5×6.5 FLAT BIND screw | x11 | |
| M2.5×8.0 | FLAT BIND screw | x6 |
| M2.5×4.0 | FLAT BIND screw | x2 |
| M2.5×3.0 | FLAT BIND screw | x1 |
| M2.5×2.0 | FLAT BIND screw | x5 |
10. Install battery pack, HDD door and Optical Drive Disk with screws | |||
| M2.5×4.0 FLAT BIND screw | x2 | |
| M2.5×3.0 FLAT BIND screw | x1 |
NOTE: If Fingerprint or Dust left on LCD screen during disassembly and assembly LCD units, please follow Appendix A to clean it.
|
|
Qosmio X500 Maintenance Manual |