Toshiba X500 manual Go To Test

Test Program for Field.

NOTES: The Item2 and 3 of Test Parameter are not used by some tests.

Go To Test

Move the highlight bar to Go To Test and press Enter to start executing the test.

Test Loop

Select NO to return the screen to the subtest menu after the test is complete. Select YES to set the test to run continuously until it is halted by the user.

Error Stop

Select NO to keep the test running even if an error is found.

Select YES to stop the test program when an error is found and display the HALT OPERATION screen as shown below:

[[ HALT OPERATION ]]

1:Test end

2:Continue

3:Retry

These three selections have the following functions:

1:Terminates the test program and exits to the subtest menu.

2:Continues the test from the error.

3:Restarts the test from the beginning.

Use the arrow keys to move the cursor to the desired option and press Enter. Table 3-1 in Section 3.3 lists the function of each test on the subtest menu. Table 3-2 in Section 3.15 lists the error codes and error status for each error.

Qosmio X500 Maintenance Manual (960-Q08) 7