Danby DDW611WLED manual Troubleshooting, Problem, Possible Cause, Solution

Models: DDW611WLED

1 44
Download 44 pages 36 Kb
Page 22
Image 22
Troubleshooting

PROBLEMTroubleshooting

Occasionally a problem may arise that is minor in nature, and a service call may not be neccessary. Use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number 1-800-263-2629for assistance.

PROBLEM

POSSIBLE CAUSE

SOLUTION

Dishwasher doesn’t

• Fuse blown or circuit breaker tripped.

• Replace fuse or reset circuit breaker.

run

• Power supply is not turned on.

• Make sure dishwasher is turned on and

 

door is closed. Plug in cord securely.

 

 

• Check that water supply is connected and

 

• Water pressure is low.

the water is turned on.

 

 

 

Noise

• Some audible sounds are normal.

• Sound from soft food shredding action

 

 

and detergent cup opening.

 

• Utensils are not secure in basket / some-

• Ensure everything is secured in the dish-

 

thing small dropped into basket.

washer.

 

• Motor hums.

• If you do not use often, dishwasher

 

 

may hum- remember to fill and pump

 

 

out appliance every week to keep the seal

 

 

moist.

 

 

 

Suds in the tub

• Improper detergent.

• Use only dishwasher detergent to avoid

 

 

suds. If suds are present, open the door

 

 

and let suds evaporate.

 

• Spilled rinse agent.

• Always wipe rinse agent spills immediate-

 

 

ly.

 

 

 

Dishes are not dry

• Rinse agent dispenser is empty.

• Make sure that the rinse agent dispener is

 

 

filled.

 

 

 

Dishes and flatware

• Improper program selected/run.

• Select a stronger program.

are not clean (spots

• Improper rack loading.

• Make sure that the detergent dispenser

filming)

 

and spray arms are not blocked by large

 

 

dishware.

 

• Extremely hard water.

• Remove all metal utensils from dishwash-

 

 

er

 

 

 

Detergent left in dis-

• Dishes blocking detergent cups.

Re-load the dishes properly.

penser cups

 

 

 

 

 

Water standing in

• This is normal.

• A small amount of clean water around the

the bottom of the

 

outlet on the tub button at the back of the

tub

 

tub keeps the water seal lubricated.

 

 

 

Water doesn’t pump

• Drain is clogged.

• Make sure the kitchen sink is draining

out of the tub

 

well. If the dishwasher drains into a dispos-

 

 

er, run it clear.

 

• Pump motor faulty.

• Have it checked by a qualified technician.

 

 

 

Dishwasher leaks /

• Overfill dispenser or rinse aid spills.

• Be careful not to overfill the rinse aid

steams

• Dishwasher isn’t level.

dispenser. Spilled rinse aid could cause

 

• Steam is normal.

oversudsing and lead to overflowing. Wipe

 

 

away any spills with a damp cloth.

 

 

• Make sure the dishwasher is level.

 

 

• Steam coming through the vent by the

 

 

door latch is normal during drying and

 

 

water draining. 9

 

 

 

20

Page 22
Image 22
Danby DDW611WLED manual Troubleshooting, Problem, Possible Cause, Solution